Dos sata hard drive driver

 · DOS Boot Driver for SATA DVD I am looking for a DOS device driver that supports the SATA DVD drives used in the E and other systems based on the Intel ICH8 chipset. I tried the www.doorway.ru v in the recommended configurations, but it does not recognize the DVD in any of multiple client machines.  · DOS should see the SATA drives if these conditions are met. If the controller is set to Compatibility (IDE) mode, not RAID or AHCI. at that point fdisk should see the drive(s)Estimated Reading Time: 6 mins. If the SATA hard drive is not showing then click the Load Driver option. The "additional controller driver" is the SATA controller driver. Whether the SATA controller is embedded on the motherboard or is an add-on card, the driver(s) can be found on .

4. How do I install drivers for my hard drive? The basic steps to install drivers for a hard drive are: Step 1. Configure the drive as a master or slave device (PATA only). Step 2. Mount the drive in the chassis. Step 3. Connect the data cable to the drive and to the PATA or SATA interface. Step 4. Connect a power cable to the drive. Step 5. How to Load SATA Driver in Windows 7 or Vista Setup. When you install Vista or Win 7, setup can not find your Hard Drive. 1) Copy your SATA drivers to a disk. (Floppy, CD, USB) NOTE: Keep this disk in a safe place, as it will be need to use in the Recovery Console. 2) Click Load Drivers. 3) Click Cancel. 4) Click Browse. You can make a CD (or USB stick) which will boot its own copy of windows and have access to your hard drive and CD drive when set to AHCI mode, as well as if they are NTFS formatted. For sata drives you just have to have the drivers on your floppy and F6 them as you would do during a windows install.

9 ago Los HDD suelen venir en dos formatos de 3,5 pulgadas (destinados a Unos y otros vienen con conectores SATA, por lo que no hay problema. Al usar el controlador de disco Intel AHCI integrado de la estación de trabajo, debe configurar los discos SATA para AHCI o Intel RAID antes de instalar. Can anyone explain to me why my DOS boot disk sees the hard drive while WinXP needs the SATA drivers loaded first before it will recognize.